|
|
New features for pipe clamps enable use of self tapping
screws to be used in conjunction with rechargeable drill. A
dimpled hole allows easy insertion of the screw. A rounded
tab bends down over the tip of the screw protection people
from the sharp point. The use of a retainer clip allows
installation in the open side of a strut channel. These
features along with the inclusion of dimpled holes in strut
channels allow almost exclusive use of one size of screw
and power driver to install conduits and pipes.
|
|
Illustration of new ways to attach hardware to new strut channel.
Dimpled holes make attaching with self-tapping screws fast and
easy. Tabbed cutouts make use of straps for hanging items
simple and flexible. Strapping can quickly be hooked to support
a load, then quickly adjusted as needed. Most existing pipe
clamps can be used on this strut channel.
|
|
|
|
|
The NuStrut easily connects to existing technology.
The use of self tapping screws and hanger straps are extensions
to old technology.
The beam clamps shown on other pages are easily attached to
the V-Struts.
|
|
|
|
|
|
|
|
|
|
|
| |
|
